Consideration Using Solar Panel Installation for Home
Solar Panel Installation for Home – The use of solar power plants is currently increasingly in demand. It can be seen from the many skyscrapers and factories in industrial areas to housing already using solar panels. In addition to increasing economic investment costs, the use of solar system electricity also does not require a large area because it can be installed on the roof of a building, commonly known as a rooftop PLTS.
Before switching to using solar panels, prospective users should review a number of things that must be considered before installing solar panels. The issue of climate change and electricity tariffs that continue to increase is the main reasons why many people are starting to switch to renewable energy today.
Solar Panel Considerations for Home Price
If you are one of the people who are interested in using solar panels, the following factors must be considered :
-
Electrical Power
Another thing that must be considered is the power of the solar panels, which must be adjusted to the electrical power of the house/building. Based on government regulations, PLTS users may install solar panels with a power of 100% of the total installed electric power. For example, your home’s electrical power is 4400 watts, so the required installation of solar panels is 1 kW to 4 kW. The higher the power of the solar panels, the higher the savings.
- Solar Panel Material
The material that is often found for use in residential or commercial buildings is the Monocrystalline type. This is often used because the price is economical and the efficiency level is very good. Even though there are many on the market, you still have to be careful about solar panel installation services. Don’t just get hung up on low prices with low quality.
-
Roof Type and Area
The roof structure greatly influences the roof’s ability to support solar panel installation for home. If the top still uses wood, replacing it with a more sturdy material, such as mild steel, is highly recommended. The roof area also affects the amount of capacity that can be installed. For example, for 4kWp power, it requires an area of 27m2.
-
Shading
Pay attention to the position of the solar panels installed on the house’s roof. The best location for optimal energy absorption is one with no obstructing objects that can cast shadows. Barrier objects often encountered, such as trees, plants, billboards, taller buildings, etc. Usually, solar panel service providers will carry out digital surveys and continue with offline site surveys. One of the results of this survey is to ensure that customers’ homes can get maximum absorption of solar energy without any obstructions around them.
How Many Solar Panels to Power a House
| No | Things That Affect the Number of Solar Panels |
| 1 | Roof area |
| 2 | Season |
| 3 | Future use of electricity |
| 4 | Solar panel efficiency |
-
Sunlight Intensity
The greater the intensity of absorption of solar energy, the higher the performance of solar panels. It depends on which country you are in, whether in a country with very high absorption of solar energy.
To further maximize energy absorption, the direction facing the solar panels can differ according to the location.
-
Electrical Load Resistance
Solar panels work from sunrise to sunset, with optimum absorption occurring at 10 am and 2 pm (about 4.5 hours). It causes the electric voltage generated by solar panels to be only sometimes stable.
For this reason, the equipment used such as inverters, must also be a concern in responding to voltage fluctuations.
-
Service and Warranty
After knowing the technical things in preparation for installing solar panels, the next step is to determine the quality of service and warranty provided by solar panel installation providers. Choose a solar panel provider that prioritizes customer satisfaction with integrated end-to-end services. Apart from using the best quality product. They usually also provide an extended warranty and after-sales, guaranteeing the protection of customers. Solar panel products and applications to monitor building energy production for 24 hours.
-
The area on the Roof
The area of the Roof of a building or building will affect the electricity capacity that a PLTS can generate. The average solar panel requires approximately 2.5 m2 to produce 1 kWh of electricity. In addition, knowing the roof area and potential capacity of the installed system can be considered in choosing the type of solar panel installation for home. You can select a type of solar panel with higher efficiency to maximize the potential for electricity production if you need a larger roof area.
FAQ
What are the 3 types of solar panels?
-In this blog we will explore the main three types of solar panel cells: polycrystalline, monocrystalline and thin-film. Understanding the difference between the three, is the very first step to selecting your perfect panel for your home, business or community.
Why is solar panel useful?
-Solar panels are a great way to offset energy costs, reduce the environmental impact of your home and provide a host of other benefits. Such as supporting local businesses and contributing to energy independence.